Branch Parent

Propriétés déclarées du moteur épinglé, pas une certification. Utilisez les identifiants natifs. Les définitions/unités/types sont conservés dans leur langue source sans conversion supposée. Absent n’est pas zéro. Voir Projets.

bus_from

Name of the bus at the "from" side

Unit: not declared Type: DeviceType.BusDevice Profile: none declared

bus_to

Name of the bus at the "to" side

Unit: not declared Type: DeviceType.BusDevice Profile: none declared

active

Is active?

Unit: not declared Type: bool Profile: active_prof

reducible

Is the branch to be reduced by the topology preprocessor?

Unit: not declared Type: bool Profile: none declared

design_rate

Design thermal rating power that is not modified for operational reasons or otherwise

Unit: MVA Type: float Profile: none declared

rate

Operational thermal rating power

Unit: MVA Type: float Profile: rate_prof

contingency_factor

Rating multiplier for contingencies

Unit: p.u. Type: float Profile: contingency_factor_prof

protection_rating_factor

Rating multiplier that indicates the maximum flow before the protections tripping

Unit: p.u. Type: float Profile: protection_rating_factor_prof

monitor_loading

Monitor this device loading for OPF, NTC or contingency studies.

Unit: not declared Type: bool Profile: none declared

mttf

Mean time to failure

Unit: h Type: float Profile: none declared

mttr

Mean time to repair

Unit: h Type: float Profile: none declared

Cost

Cost of overloads. Used in OPF

Unit: e/MWh Type: float Profile: Cost_prof

capex

Cost of investment. Used in expansion planning.

Unit: e/MW Type: float Profile: none declared

opex

Cost of operation. Used in expansion planning.

Unit: e/MWh Type: float Profile: none declared

group

Group where this branch belongs

Unit: not declared Type: DeviceType.BranchGroupDevice Profile: none declared

color

Color to paint the element in the map diagram

Unit: not declared Type: str Profile: none declared

bus_from_pos

Aid to locate devices on a busbar

Unit: not declared Type: int Profile: none declared

bus_to_pos

Aid to locate devices on a busbar

Unit: not declared Type: int Profile: none declared

temp_base

Base temperature at which R was measured.

Unit: ºC Type: float Profile: none declared

temp_oper

Operation temperature to modify R.

Unit: ºC Type: float Profile: temp_oper_prof

alpha

Thermal coefficient to modify R,around a reference temperature using a linear approximation.For example:Copper @ 20ºC: 0.004041,Copper @ 75ºC: 0.00323,Annealed copper @ 20ºC: 0.00393,Aluminum @ 20ºC: 0.004308,Aluminum @ 75ºC: 0.00330

Unit: 1/ºC Type: float Profile: none declared