Bus

Propriétés déclarées du moteur épinglé, pas une certification. Utilisez les identifiants natifs. Les définitions/unités/types sont conservés dans leur langue source sans conversion supposée. Absent n’est pas zéro. Voir Projets.

active

Is the bus active? used to disable the bus.

Unit: not declared Type: bool Profile: active_prof

is_slack

Force the bus to be of slack type.

Unit: not declared Type: bool Profile: is_slack_prof

is_dc

Is this bus of DC type?.

Unit: not declared Type: bool Profile: none declared

is_grounded

Is this bus connected to ground?.

Unit: not declared Type: bool Profile: none declared

graphic_type

Graphic to use in the schematic.

Unit: not declared Type: BusGraphicType Profile: none declared

Vnom

Nominal line voltage of the bus.

Unit: kV Type: float Profile: none declared

Vm0

Voltage module guess.

Unit: p.u. Type: float Profile: Vm0_prof

Va0

Voltage angle guess.

Unit: rad. Type: float Profile: Va0_prof

Vmin

Lower range of allowed voltage module.

Unit: p.u. Type: float Profile: Vmin_prof

Vmax

Higher range of allowed voltage module.

Unit: p.u. Type: float Profile: Vmax_prof

Vm_cost

Cost of over and under voltages

Unit: e/unit Type: float Profile: none declared

angle_min

Lower range of allowed voltage angle.

Unit: rad. Type: float Profile: none declared

angle_max

Higher range of allowed voltage angle.

Unit: rad. Type: float Profile: none declared

angle_cost

Cost of over and under angles

Unit: e/unit Type: float Profile: none declared

x

x position in pixels.

Unit: px Type: float Profile: none declared

y

y position in pixels.

Unit: px Type: float Profile: none declared

h

height of the bus in pixels.

Unit: px Type: float Profile: none declared

w

Width of the bus in pixels.

Unit: px Type: float Profile: none declared

country

Country of the bus

Unit: not declared Type: DeviceType.CountryDevice Profile: none declared

area

Area of the bus

Unit: not declared Type: DeviceType.AreaDevice Profile: none declared

zone

Zone of the bus

Unit: not declared Type: DeviceType.ZoneDevice Profile: none declared

substation

Substation of the bus.

Unit: not declared Type: DeviceType.SubstationDevice Profile: none declared

voltage_level

Voltage level of the bus.

Unit: not declared Type: DeviceType.VoltageLevelDevice Profile: none declared

bus_bar

Busbar associated to the bus.

Unit: not declared Type: DeviceType.BusBarDevice Profile: none declared

longitude

longitude of the bus.

Unit: deg Type: float Profile: none declared

latitude

latitude of the bus.

Unit: deg Type: float Profile: none declared

color

Color to paint the element in the diagram

Unit: not declared Type: str Profile: none declared